It is true that you can always sew fabrics or clothes even if you do not have a sewing machine. However, this takes time and requires plenty of energy. On the other hand, if you have a sewing machine, you will be able to finish up your clothes in no time at all and you will barely waste your energy. With that being said, perhaps it is a wise idea for you to learn how to use a sewing machine. Fortunately, this guide will help you do so.
First of all, you need to make sure that the bobbin is in its proper place. Then, you can thread the needle, using the provided balance wheel to adjust the height of the needle necessarily. Then, at the time the bobbin thread shows up, it is time that you lay it on a throat plate, after retracting it from the cavity. When you are done with that, it is important that you make sure you raise the presser foot and the needle.
The next step after that is to try and make some stitches. In this case, however, you should use nothing but scrap fabric or clothes. To get things started, you can use the throat plate to put the fabric. You should make sure that you put the bulk, or the larger part, of the fabric at the left hand side of your sewing machine. When that is done, the next thing that you will have to do is to put the fabric edges into alignment with the hemline guide. You need not worry as the throat plate of your sewing machine normally has this guide marked on it. The markings should be at their standard widths whereas the presser foot should be at a lowered position so that the fabric will be in a secured position.
Some sewing machines you can find in the market come with more than just a single setting. In that case, you need to resort to the basic setting, the straight stitch. What you have to do next is to press the knee switch or foot pedal slowly by slowly while at the same time positioning the fabric underneath the needle. Keep in mind that you need to do this gently and slowly. You should avoid your hand from going underneath the needle as well while inserting the fabric.
First of all, you need to make sure that the bobbin is in its proper place. Then, you can thread the needle, using the provided balance wheel to adjust the height of the needle necessarily. Then, at the time the bobbin thread shows up, it is time that you lay it on a throat plate, after retracting it from the cavity. When you are done with that, it is important that you make sure you raise the presser foot and the needle.
The next step after that is to try and make some stitches. In this case, however, you should use nothing but scrap fabric or clothes. To get things started, you can use the throat plate to put the fabric. You should make sure that you put the bulk, or the larger part, of the fabric at the left hand side of your sewing machine. When that is done, the next thing that you will have to do is to put the fabric edges into alignment with the hemline guide. You need not worry as the throat plate of your sewing machine normally has this guide marked on it. The markings should be at their standard widths whereas the presser foot should be at a lowered position so that the fabric will be in a secured position.
Some sewing machines you can find in the market come with more than just a single setting. In that case, you need to resort to the basic setting, the straight stitch. What you have to do next is to press the knee switch or foot pedal slowly by slowly while at the same time positioning the fabric underneath the needle. Keep in mind that you need to do this gently and slowly. You should avoid your hand from going underneath the needle as well while inserting the fabric.
Since you only need one hand to move the fabric underneath the needle, you should use your other hand to make sure the loose thread stays tugged instead of becoming entangled in the fabric you are working on. Remember, you need to do this gently. The feed mechanism on the sewing machine will help you move the fabric from one end of it to the other. All you need to do here is to keep the fabric straight by pressing it, but only with mild strength.
Then, when the stitches have been completed, you can now safely lift up the sewing machine’s presser foot. In addition to that, you need to check, too, if the needle has been raised at the same time the presser foot is lifted. If it has been raised indeed, it is now safe to get the fabric away from the machine. The thread near the fabric should be cut as well. If the stitches on your fabric are interlocked, this means that your sewing machine has been properly threaded and there is nothing you need to worry about.
Then, when the stitches have been completed, you can now safely lift up the sewing machine’s presser foot. In addition to that, you need to check, too, if the needle has been raised at the same time the presser foot is lifted. If it has been raised indeed, it is now safe to get the fabric away from the machine. The thread near the fabric should be cut as well. If the stitches on your fabric are interlocked, this means that your sewing machine has been properly threaded and there is nothing you need to worry about.